מאפייני הסחורה

Material:

Aluminum Alloy

Weight:

1301g/483.3oz  

Plug & Voltage:

US Plug 110-240V

Rotary Wheel Diameter:

6.5cm/2.6inch

Rotary Wheel Thickness:

3cm/1.2inch

Size:

12*12*7cm/4.7*4.7*2.8inch

Package List:

1 x Ceramic Machine:

5 x Wooden Clay Tool :

6 x Aluminum Clay Tool :

1 x Hexagonal Screwdriver:

1 x Charger :

Note:

Operation note:

 

1. Roll the clay into a cylinder, fix it in the center of the turntable and press it. :

2. Use the ceramic tool alignment center to slowly open the hole, then slightly expand outward a bit. :

3. Use ceramic tools to shape and trim the profile of your work. :

4. Keep the rotating disc at constant speed and dry the work surface with a spray gun/ hot air gun. :

5. Use tools from top to bottom to modify, and finally fix the bottom :

6. After the work is completed, the work can be cut off with a scraper or a knife-edge tool :

Suggestions:

 

1. Get smaller pieces of mud :

2. Don't rotate too fast and slow at a slower speed. :

3. When shaping, you can stretch it out a bit thicker and then thin it out slowly.:

4. Use clay tools to assist molding, less water. :