מאפייני הסחורה

Condition:

100% brand new and high quality

Current:

M a x. 12mA

Power supply input voltage:

12-30V

Size:

Approx. 5 x 4.5cm / 1.97 x 1.77inch

Weight:

20g

Quantity:

1pc

Using method:

PWM signal input frequency range:

1KHZ-3KHZPWM signal input level range

0-10V analog voltage output explanation:

When the signal input port is not connected, the output port gives 0V. The first time when we power on this module, we better calibrate it:

find a 50% duty ratio signal, connect to DIN-, DIN+, the amplitude matches corresponding jumper. When frequency is at 1kHz ~ 3kHz, use a multi-meter to test AO, GND. The meter should be showing around 5.4V. We adjust the potentiometer on the converter module to make multi-meter shows about 5.4V. After this is done, we have calibrated and matched pulse signal with this converter module.  The module has a definition of 0.1V. Output current 10mA. If duty ratio is in opposite to voltage, we can select PWM output pin STEP LOW / ACTIVE for MACH3 software.

Package Included:

1 x PWM Signal to Voltage Converter :

Note:

After power-up, when there is no input signal, the output is 0V. There is output only when there is input.: